Loading...
Serving St. Petersburg, FL and surrounding areas. (727) 632-8174
We grind, coat, and polish concrete floors for homeowners and businesses throughout St. Petersburg and Pinellas County. Every job starts with proper prep - because that is the only way a coating stays put in Florida.
St. Petersburg Concrete Polishing & Epoxy Flooring is a licensed concrete flooring contractor based in St. Petersburg, FL, serving 12 cities across Pinellas County. We offer 16 concrete flooring services - from basic garage floor coatings to commercial epoxy systems and polished concrete. Every project gets the same attention to prep and product selection, whether it is a 200-square-foot garage or a 20,000-square-foot warehouse floor.
Tired of oil stains soaking into bare concrete? Epoxy seals the surface permanently and gives you a glossy, easy-clean floor that holds up for years.
Learn More
Heavy foot traffic, chemical spills, and forklift loads wreck bare concrete fast. Commercial-grade epoxy systems handle the punishment and keep your space looking professional.
Learn More
Your garage floor takes everything you throw at it. A quality coating stops stains before they soak in and turns the space into somewhere you actually want to spend time.
Learn More
Need the job done in one day without sacrificing quality? Polyaspartic coatings cure fast, resist Florida heat, and hold their color in direct UV light for years.
Learn More
Plain gray concrete is just the starting point. Metallic epoxy creates a one-of-a-kind swirling finish that looks like a showroom floor in your own home.
Learn More
Commercial kitchens and food-service floors need more than looks - they need slip resistance, chemical tolerance, and the ability to handle thermal shock. Urethane cement delivers all three.
Learn More
Grinding and polishing reveals the beauty already locked inside your concrete slab, producing a low-maintenance surface that gets better looking with age.
Learn More
Acid staining reacts with the minerals in your slab to create rich, variegated color that can never chip or peel off because it is part of the concrete itself.
Learn More
Terrazzo combines marble chips, glass, or aggregate into a poured surface that is genuinely one of the most durable and beautiful flooring options available.
Learn More
Florida basements stay damp, and bare concrete absorbs that moisture right back into your living space. A sealed, coated basement floor changes the whole feel of the room.
Learn More
Every coating job starts with proper prep. Diamond grinding opens up the concrete surface so whatever goes on top bonds completely and stays put.
Learn More
Bare concrete is porous - it absorbs oil, water, and salt until you seal it. A penetrating sealer protects the surface without changing how it looks.
Learn More
When concrete is stained, cracked, or just worn out, resurfacing bonds a fresh layer to the existing slab instead of tearing everything up and starting over.
Learn More
Uneven floors create trip hazards and make furniture rock. A self-leveling overlay flows into low spots and cures flat, giving you a smooth, level surface to build on.
Learn More
Florida sun and pool chemistry are hard on bare concrete. A non-slip, UV-stable deck coating protects the surface and keeps the area around your pool looking clean.
Learn More
Old coatings that are peeling, bubbling, or bonded poorly have to come off completely before anything new will adhere. We remove what is failing so the next coating can stick properly.
Learn MoreWe keep the process straightforward. Here is what to expect from your first call to the finished floor.
Reach out by phone or through the estimate form on this page. We will ask a few basic questions - floor size, current condition, and what you want the space to do - so we come prepared. We respond within 1 business day.
We visit your property, inspect the concrete in person, and test for moisture - especially important in St. Petersburg where the water table is high. After the visit, you get a written quote with no pressure and no obligation.
Our crew handles all the prep, coating, and cleanup. We give you a clear timeline before we start and walk you through the finished floor before we leave, so you know exactly how to take care of it.
Florida requires concrete and flooring contractors to carry a state-issued license from the Department of Business and Professional Regulation. We are fully licensed and carry liability insurance on every job we take.
We have been working in Pinellas County since 2015. We know the moisture conditions, the older concrete slabs, and the scheduling challenges that come with Florida summers - and we plan around all of them.
We do not quote over the phone without seeing the floor. Every estimate includes a site visit, a moisture test, and a written price. The number we quote is the number you pay - no surprises when the job is done.
In St. Petersburg, moisture rising through the slab is the single most common reason coatings fail early. We test every floor before we apply anything, and we use a vapor-barrier primer when the reading is high.
Ready to get started? Call (727) 632-8174 or send us a message.
"They showed up on time, tested the slab for moisture before starting, and had the floor done in two days. It has been six months and the coating still looks exactly like it did when they finished - no peeling, no bubbling. Worth every penny."
- David M., St. Petersburg - Garage Floor Coatings
"Our warehouse floor was rough concrete that we had been mopping forever. The crew ground it down, leveled a few low spots, and put down a commercial epoxy that has held up through forklift traffic and daily cleaning. The quote was accurate - nothing extra showed up on the bill."
- Lisa T., Clearwater - Commercial Epoxy Floor Coatings
"I asked them to do the pool deck because it was cracking and slippery. They repaired the cracks, resurfaced the whole thing, and put down a non-slip coating. It looks completely different now - and my kids are not slipping around the edge anymore."
- Marcus R., Largo - Pool Deck Coatings and Resurfacing
We respond to every estimate request within 1 business day. There is no obligation - just a straight answer about what your floor needs and what it will cost. After you submit, someone from our office will call to schedule a free on-site visit so we can see the floor in person before giving you a written price.
(727) 632-8174St. Petersburg Concrete Polishing & Epoxy Flooring is based in St. Petersburg and serves all 12 communities listed below, including Clearwater, Largo, Pinellas Park, and surrounding cities. We offer same-week scheduling for most projects and typically have availability across the full Pinellas County service area within a few business days of your estimate.
If your floor is damp when no water came in under the door, moisture is pushing up through the slab from below. In St. Petersburg, the water table is naturally high, making this a common problem. A properly applied coating with a moisture-barrier primer stops the cycle - but skipping the moisture test first will just trap the problem underneath.
Older epoxy formulas can soften in extreme heat and yellow under UV light - both real problems in Florida garages. Modern polyaspartic coatings were developed specifically for high-temperature, high-UV environments. If you are replacing a coating that yellowed or went soft, the product choice matters as much as the prep work.
Surface preparation is the most important step in any coating job. Professional contractors use diamond grinding machines to open up the concrete so the coating can bond. Older slabs in established St. Petersburg neighborhoods often need more grinding passes because of decades of oil stains and surface wear. The American Concrete Institute at concrete.org covers preparation standards in detail if you want to read further.
Epoxy is a proven, durable option with a longer cure time. Polyaspartic cures in hours, handles heat better, and resists UV yellowing - making it a better fit for Florida garages that get afternoon sun. Both are good products when applied correctly. The right choice depends on how the space is used and how much time you can stay off the floor.
Florida requires concrete and flooring contractors to hold a license from the Department of Business and Professional Regulation before doing commercial or residential work. The license number is public record and searchable on the DBPR website. Hiring an unlicensed contractor leaves you without legal recourse if the work fails - and can affect your homeowner insurance claim if something goes wrong.
Concrete and asphalt both have a place in Florida, but concrete tends to outperform asphalt in the heat. Asphalt softens in high temperatures and can develop ruts in driveways with regular vehicle traffic. Concrete stays rigid and, when properly sealed, holds up well to Florida humidity, salt air, and the freeze-thaw cycles that occasionally hit Pinellas County in winter. The Portland Cement Association at cement.org has detailed information on concrete performance in southern climates.
St. Petersburg Concrete Polishing & Epoxy Flooring is a licensed and insured concrete flooring contractor company based in St. Petersburg, FL, serving 12 cities across Pinellas County since 2015. We hold a Florida state contractor license issued by the Department of Business and Professional Regulation, which you can verify on the DBPR public license search tool.
Since 2015, we have completed residential and commercial concrete flooring projects across St. Petersburg, Clearwater, Largo, and the surrounding communities - covering all 16 services in our catalog, from basic garage floor epoxy to large-scale commercial polished concrete.
Want to learn more about how we work and what sets us apart? Read our full story on the About page.
Most surface damage - staining, minor cracking, efflorescence - can be addressed with proper prep before coating. Structural cracks that go all the way through the slab, or concrete that is actively heaving, need evaluation first. A reputable contractor will tell you honestly if coating makes sense or if repairs need to come first.
A good coating lies flat with no bubbles, peeling edges, or thin spots. Color is even, flakes are distributed consistently, and there are no visible lap marks. Poor coatings usually show themselves at the corners or near drains first - within the first year - because those areas are hardest to prep and apply evenly.
Routine cleaning is straightforward - sweep or dust-mop regularly, damp-mop with a mild cleaner as needed, and avoid dragging sharp metal objects across the surface. Most coatings benefit from a topcoat refresh every five to seven years. The EPA has general guidance on safe floor cleaning products at epa.gov if you want to avoid harsh chemicals near drains.
Have questions about your specific floor? Call (727) 632-8174 or send us a message and we will give you a straight answer.
St. Petersburg is a city of about 265,000 people on a peninsula between Tampa Bay and the Gulf of Mexico. That coastal location is part of what makes living here great - and part of what makes maintaining a home here different from anywhere else. The salt air, the high water table, and the stretch of daily afternoon thunderstorms from June through September all affect how concrete slabs age and how floor coatings perform.
The city covers a wide range of housing stock, from the craftsman bungalows of Kenwood and Historic Roser Park - where homes built in the 1920s and 1930s are common - to the newer condos rising around downtown near Tropicana Field and the Salvador Dali Museum. Older slabs in the established neighborhoods often need more prep work before a coating will hold - decades of oil stains, surface carbonation, and minor cracking from soil movement all have to be addressed before anything goes on top.
We work all across St. Petersburg - from the older bungalow streets near downtown to the waterfront homes in Snell Isle and the newer properties closer to the Gulf beaches. If your garage floor has seen better days, or your commercial space needs a durable coating before the busy season, call us at (727) 632-8174.
By appointment only, no walk-ins.
St. Petersburg Concrete Polishing & Epoxy Flooring
1314 7th St S
St. Petersburg, FL 33701
Get a free on-site estimate for your concrete flooring project in St. Petersburg and Pinellas County. We respond within 1 business day.